Two Pack Epoxy Marine Boat Primer High Build A/C Zinc Phosphate

1 Colour(s) Available

  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • High Anti corrosion & Chemical Protection for Metal
  • High Build Anti Corrosive Zinc Phosphate
  • Multi-Buy Discounts
  • Free Delivery Available

Regular price
£69.99 Inc. VAT
Sale price
Regular price
Exc. VAT
Sold out
Unit price
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.



  • Two Pack Epoxy HB ZP Primer

    Two Pack High Build Epoxy Zinc Phosphate Marine Primer is suitable for use on metal fabrications where a highly anti-corrosive and chemically resistant primer is required, For above and below the waterline.

  • About This Item

    • HIGH PERFORMANCE TWO PACK EPOXY HB ZP PRIMER - Widely used on boats and barges that are made from metal & fiberglass, for above and below the water line.
    • TWO PACK EPOXY ANTI CORROSIVE METAL PRIMER - Provides excellent adhesion to fiberglass and grp while also providing a highly anti corrosive coating to metal.
    • MULTI USE 2PK EPOXY METAL  PRIMER - Versatile for marine boats and barges, and any other metal fiberglass and grp.
    • EASY APPLICATION - High quality and versatile epoxy metal primer undercoat that you can easily apply via brush, roller or spray .
    • TWO PACK EPOXY KEY FACTS & BENEFITS - Coverage 8m2 per Litre | Touch Dry in 2-4 Hours| Overcoat 12-24 hours | Full protection and waterproof after 7 Days | Catalyst Included | Mixing Ratio 4:1
    • POT LIFE FOR TWO PACK EPOXY PAINT once components are mixed pot life is around 4-6 hours.
    • Thinners T0200 Universal Thinners
    • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans


    Painting Step by Step

    1. The area must be dry and clean free from dirt, dust, oil, grease and any other contaminants. Good preparation is key to a good finish.
    2. Before you start, have your PPE ready as our paint is solvent based and will not wash off easily with soap and water. Brushes and rollers will need to be solvent resistant.
    3. Stir the paint and catalyst together well (4-1 mixing ratio) before use with a paddle on a slow running drill or substantial stick, improper mixing will cause the paint to stay tacky or wet and not dry.
    4. Before putting paint down ensure you have good ventilation to allow solvent vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
    5. Cut in around the edges first
    6. Apply a first coat of primer. 12-24 hours later apply first coat of top coat.


    Mixing Two Pack Epoxy

    Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

    As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.

    Remember do not apply Two Pack Epoxy Paint in temperatures below 10 degrees centigrade cross linking of the paint and catalyst will not take place and the coating will never fully dry.


    About Us

    T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

    Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.


    Our Ethos

    Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.


Additional Information