Two Pack Epoxy Swimming Pool Paint

Regular price
£18.20 Exc. VAT
Sale price
Regular price
Exc. VAT
Sold out
Unit price
Shipping calculated at checkout.


Two Pack Epoxy Swimming Pool Paint


Two Pack Epoxy Swimming Pool Paint is based on an epoxy resin that provides an excellent hard wearing coating once fully cured.


This can be applied to

  • Fibreglass - bare fibreglass must be primed with than epoxy primer beforehand
  • Metal - we recommend bare metal is primed with an epoxy primer prior to using this top coat
  • Concrete 
  • Brick



Key Facts 

Two coats recommended

Mixing ratio 4 parts paint to 1 part catalyst

Pot life of 4-6 hours once catalysed

Touch dry 2-4 hours

Over coat 12-24 hours

Full dry 7 days

Thinners suitable T0200

Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)

Shelf life - 12 months from batch date


Things to know
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • Two Pack Epoxy can not be applied over a single pack paint as this will attack the existing coating.
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating.
  • Do not paint in direct sunlight
  • Epoxies won’t cure in temperatures below 10 degrees c.

Mixing Two Pack Epoxies

1. Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix (An egg whisk, screwdriver or small stick that doesn’t reach the bottom of the can is not sufficient enough)

2. Mixing should take place for 3-5 minutes allow to stand for a minute and repeat.

3. Ensuring all the content is properly mixed to avoid colour and or drying problems.



Prime Colors

Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 08 E 51 Yellow, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 445 Tile Red, RAL 5012 Light Blue, White


1 litre, 2.5 litre