Step Paint for Wood Metal Concrete Stone Brick Brush Roller or Spray Apply
- Application By Brush Roller & Suitable Spray
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- Quick & Easy To Use Perfect For Light To Medium Traffic
- Suitable For Concrete, Metal, Wood, Stone & Brick
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £29.99 Inc. VAT
- Sale price
- £29.99
- Regular price
-
- Unit price
- per
Description
Universal PU
Step Paint
Our step paint is suitable for concrete, metal,wood, stone and brick steps where light to medium foot traffic will occur. It is a polyurethane enamel that provides a hard wearing finish which offers great protection and when used externally has great UV resistance. Can be used both internally and externally.
This is paint is not suitable if you will be having vehicles using the area i.e. car’s, motor bikes and forklift trucks.
Like any painted surface when wet is slippery, we do offer a non-slip version which is a rough textured finish. Click here for our Non Slip Floor Paint.
Key Facts
Can be brushed, roller or spray appliedDo not pre seal concrete espesally with latex or PVC sealers paint will not stick Easy Clean High Gloss Finish
Touch Dry 2-4 hours
Over coat 12-24 hours
Thinners suitable T0001 White Spirit Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)
Suitable for light to medium foot traffic (Two pack epoxy floor paint is requiored for vehicles) Two Coats recommended for best results
No Primer Needed Just Apply Two Coats 1st Coat Will Act As A Primer (aplicable to concrete and wood)Multi Aplication suitable for Primed Metal, Wood, Timber Concrete and primed Fibreglass/GRPMake sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems. Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Primers
Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please Click here
Fibreglass – If the fibreglass is bare you will need a fiberglass primer. For Two Pack Epoxy Fiberglass Primer Click here. For Single Pack Fiberglass Primer Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here
Aluminium – The primer suitable for aluminium is One Pack Etch Primer. Click here
Wood, Concrete, Stone or Brick - No primer requiored 1st coat will prime and seal. You will find that these kind of substrates will be porous, we recommend that on your first coat thin by 20% to ensure it impregnates the substrate. Then after 12-24 hours apply the second coat un thinned.
Good Preperation of the floor is paramount to an excellent long lasting finish. Make sure Floor is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting espesally with laytex or PVC selaers paint will not stick.
New Concrete Floors will need time to green this generally is a period of 3-6 months from when the concrete floor is layed, we say 3-6 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete floor as to how long to wait till painting.
Always stir floor paint well prior to using
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Single Polyurethane Pack Floor Paint
Single Pack Floor Paint is based on a polyurethane enamel resin that provides a good hard-wearing coating once fully dry, with a mirror like gloss finish to industrial concrete floors and other suitably primed substrates for internal and external applications.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.