This product is not suitable for the following
- Tiles of any sort
- Unprimed plastic
- Bare aluminium (you will need a suitable etch primer)
- Untreated galvanised steel (Mordant solution first)
- A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.
All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.
Home & Garden Decking Paint
Please note this is not a translucent clear due to the natural colouring of the resin this does have a red yellow tinPlease Be Advised when painted surface may become slippery when wet Click Here for non slip option.
New 3 In 1 Formulation
NEW 3 IN 1 TECNOLOGY
Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete & wood 2 coats of this paint will prime seal and protect.
About this item
- NEW 3 IN 1 TECNOLOGY - Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete & wood 2 coats of this paint will prime seal and protect. Multi surface for painting metal wood or timber concrete stone and brick work, one paint covers it all.
- GARDEN DECKING PAINT: Specially developed for outdoor use to colour and protect outdoor projects and to be superior to cheap water based alternatives.
- WATERPROOF OUTDOOR PAINT: Exceptional coverage & does a great job of repelling rainwater and providing high protection from the harsh environmental elements, With long lasting UV protection.
- MULTI PURPOSE DECKING PAINT: It's versatile and can be used to paint wood, brick, terracotta, primed metal, timber & concrete. Perfect for use in the garden and industrial aplications like fence panels, garden arches, benches, sheds, fences, arbours, summer houses, trellis, garden patio furniture, gates and railings, skips & containers, buildings and much more
- FAST DRYING TIME: Touch Dry in 90 - 120 Minutes, Overcoat 12 - 24 hours making this product perfect for outdoor use and for a DIY project
- EASY APPLICATION: Brush roller and suitable spray application.
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans
Two coats of paint are recommended for the best longest lasting finish.
If brushing thinning is not usually required but if you preferred to thin the product 10%
Remember good preparation is paramount to an excellent long lasting finish.
Painting Guide Step By Step
- Abraid area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates.
- The area must be clean and free from dirt, dust, oil, grease, old flaking paint and be dry & clear of any other contaminants. Good preparation is key to a good finish.
- Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
- Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
- Thin the first coat by 10 percent with T0001 if painting wooden surfaces, to assist good absorption.
- Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
- Cut in around the edges and hard to reach areas first with brush, if brushing and rolling is your application method.
- Depending on what you're painting, apply a second coat 2-12 hours or an overnight dry after the first coat to build good colour and protection.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please Click here
Wood Undercoat – If you are painting wood and want an undercoat please Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here
Etch Primer – For One Pack Etch Primer. Click here
Aluminium – The primer suitable for aluminium is Two Pack Etch Primer. Click here
Wood, Concrete, Stone or Brick - No primer requiored 1st coat will prime and seal. You will find that these kind of substrates will be porous, we recommend that on your first coat thin by 20% to ensure it impregnates the substrate. Then after 12-24 hours apply the second coat un thinned.
Other Application Advice
Always stir any paint well prior to using, especially if using Two Pack products.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
Universal PU Enamel is based on a white spirit polyurethane enamel resin making it very versatile in its application and covering a wide range of uses. Our product titles are for advertising purposes only, this product will arrive as Universal PU Enamel tins supplied will be similar to that shown above, manufactured by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never comprom
Calculate Your Solvent Paint
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.