Paint for Off Road Vehicles

Military Land Rover Off Road Vehicle Paint
Regular price
£13.20 Exc. VAT
Sale price
Regular price
Exc. VAT
Sold out
Unit price
Shipping calculated at checkout.

Cannot find the colour or gloss level your looking for?

Click here for our full colour range and finishes.


Military, Land Rover, Off Road Vehicle  Enamel

Military Vehicle Paint is a Polyurethane based enamel which provides a tough film with good adhesion, gloss, and weathering properties. When fully dry, the coating exhibits good resistance to petrol, paraffin, and mineral oil spillage.

This product can be used in many different ways such as chassis, engines, tanks, land rover, military, MOD & off road vehicles. Available in Nato and camouflage colours.




Key Facts 

It can be brushed, rolled, and sprayed.

High gloss finish (Matt and Semi-Gloss finishes are available - click here)

Touch Dry 2-4 hours

Over coat 12-24 hours

Thinners suitable T0001 White Spirit

Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)

 Suitable for Metal, Primed Fiberglass, Wood, Concrete, Brick and  Plastisol (12 months old)

Shelf life - 12 months from batch date


Mixing and Thinning

Make sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

You can purchase a mixer from us just click here

Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.



Application - Painting over existing paint 

Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.

Step 2 Clean and Abrade -

    • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
    • If there is flaking paint this must be removed prior to painting.
    • For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
    • Ensure substrate is clean of any dirt, oil, or grease

      Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

      Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.



      Application - Painting a bare substrate 

      Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.

      Step 2 Prime – Depending on the material you are painting will determine what primer you will need.  

      Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.


      Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please click here

      Fibreglass – If the fibreglass is bare you will need a fiberglass primer. Click here

      Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution you will need our Metal Primer. Click here

      Aluminium – The primer suitable for aluminium is One Pack Etch Primer. Click here


      Prime Colors

      Gloss Black, Matt Black, Semi-Gloss Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 10 C 31 Cream, BS 18 B 25 Grey, BS 224 Deep Bronze Green, BS 226 Mid Brunswick Green, BS 227 Deep Brunswick Green, Semi-Gloss BS 285 Nato Green, Matt BS 285 Nato Green, Semi-Gloss BS 298 Olive Drab, Matt BS 298 Olive Drab, RAL 5017 Blue, Ral 6011 Green, RAL 7024 Grey, Tile Red, Gloss White, Semi-Gloss White, Matt White, Gloss Clear Sealer


      1 Litre, 2.5 Litre