Exterior paint for wood, metal, stone, concrete and brick
Exterior Gloss Paint is based on a polyurethane enamel resin that provides a good hard-wearing coating, with great protection from the elements and is UV resistant.
It can be brushed, rolled, and sprayed.
Touch Dry 2-4 hours
Over coat 12-24 hours
Thinners suitable T0001 White Spirit
Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)
Suitable for Metal, Primed Fiberglass, Wood, Concrete, Brick, Stone and Plastisol (12 months old)
Shelf life - 12 months from batch date
If you are using this externally on floors or decking, when wet it can be slippery so we recommend our Non Slip Paints
Make sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
You can purchase a mixer from us just click here
Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please click here
Fibreglass – If the fibreglass is bare you will need a fiberglass primer. Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution you will need our Metal Primer. Click here
Aluminium – The primer suitable for aluminium is One Pack Etch Primer. Click here
Wood, Concrete, Stone or Brick - You will find that they will be porous we recommend that on your first coat thin by 20% to ensure it impregnates the substrate. Then after 12-24 hours apply the second coat un thinned.