Advice Line
Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk
Epoxy Anti Slip Floor Paint
Two Pack - Primes and Protects 10 Colour(s) Available
- Application By Brush & Roller
- Heavy Duty Easy To Use Non Slip For Heavy Traffic
- Suitable For Concrete Stone & Brick
- Walk On Dry Time as Little as 24 Hours
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £92.99 Inc. VAT
- Sale price
- £92.99
- Regular price
-
- Unit price
- /per
Find Your Perfect Colour
Adding product to your cart
Advice Line
Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk
This product is not suitable for the following
- Tiles of any sort
- Unprimed plastic
- Bare aluminium (you will need a suitable etch primer)
- Untreated galvanised steel (Mordant solution first)
- A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.
All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.
Description
Epoxy Anti Slip Floor Paint is suitable for use on concrete or metal floors where heavy traffic will occur. For use on garage, industrial factory, warehouse, industrial kitchen and shop floors to provide a highly protective and hard wearing coating with excellent chemical resistance.
Epoxy paint with an aggregate already mixed in which makes a rough, textured finish that is ready to use of the can (after you have thoroughly stirred the paint) Which is perfect for use in areas prone to moisture or spillage.
The most cost effective way and ease of application is on your first coat apply standard smooth paint and then after 12-24 hours apply the second coat non slip
Important Notice:
Do not apply two pack epoxy paint in temperatures below 10 degrees Celsius, as the cross-linking of the paint and catalyst will not occur, preventing the coating from fully drying.
While epoxy coatings are renowned for their superior chemical resistance and protection against the elements, it is important to note that colours may chalk and fade when used in external applications.
Epoxy floor paints cannot be used over single-pack coatings, as they will attack the existing paint.
About Two Pack Epoxy Anti-Slip Paint:
- EPOXY ANTI SLIP FLOOR PAINT: This two-part epoxy-based resin includes an aggregate mixed in, providing a rough textured finish that reduces the risk of slips.
- APPLICATION: Apply by brush or solvent-resistant medium pile rollers.
- MIXING RATIO: The mixing ratio 4:1. 4 parts paint to 1 part hardener.
- POT LIFE: Once the components are mixed, the pot life is around 4-6 hours.
- COVERAGE: Approximately 8 square metres per litre. This does not account for the method of application, absorption of substrate or wastage.
- DRYING TIMES: Full curing takes 7 days, but the area can be walked on after 4 days.
- THINNERS: T0200 Epoxy thinner
- Proudly manufactured in England by B.C Paints Ltd. Images and product titles are for advertising purposes only; tins are supplied in BC Paints cans or plain white for 1 and 2.5, and occasionally 5 litre cans.
Mixing Advice:
- Use a mixer on a slow-running drill to mix the paint and catalyst together. An egg whisk, screwdriver, or small stick that doesn’t reach the bottom of the can is insufficient for proper mixing.
- Mix for 3-5 minutes, allow to stand for a minute, and then repeat.
- Combine the catalyst into the tub before pouring it into a paint tray.
- If you are thinning the paint for the first coat, this is added once the paint has been catalysed.
- Ensure all components are thoroughly mixed to avoid any colour inconsistencies or drying issues.
Make sure to thoroughly stir the paint before application, as the aggregate can settle on the surface. If the non-slip component isn't mixed well, you'll end up with a thick concentration of it initially, causing uneven distribution—resulting in less non-slip texture as you use more of the paint.
Application - Painting Over Existing Paint:
Step 1 – PreparationBefore starting, verify that the product is compatible with the existing paint by testing a small area first, two pack epoxy paints will attack single pack paints. Ensure the workspace is well-ventilated to allow vapours to escape, as poor air circulation may hinder proper drying.
Step 2 – Clean and Abrade
Ensure the existing paint is in good condition. Lightly abrade the surface to create a key for proper adhesion between coats. Remove any flaking paint, and make sure the surface is clean and free of dirt, oil, or grease before painting.
After completing the prep and cleaning steps, apply the first coat of topcoat. Begin by cutting in around the edges with a 2- or 3-inch brush, and work backwards towards the exit.
Application - Painting Bare Substrate:
Step 1 - Preparation: Ensure the workspace is well-ventilated to allow vapours to escape, as poor air circulation may hinder proper drying. Ensure the substrate is completely dry and free of any dirt, oil, or grease.
Step 2 - Prime:
Concrete: We recommend using the standard smooth Two-Pack Epoxy Paint, as it’s easier to apply than the non-slip version. Thin the paint by 20% with T0200 Epoxy Thinners, which helps it penetrate the concrete and act as a primer/sealer. If you prefer to use the Non-Slip Epoxy Paint for the first coat, the same 20% thinning applies.
Metal: For bare metal surfaces, you will need to apply one coat of our Two-Pack Epoxy HB Primer
Begin by cutting in around the edges with a 2- or 3-inch brush, and work backwards towards the exit.
Step 3 - Topcoat: After completing the following steps, apply the first coat of topcoat. When painting metal, you will need to apply two coats of topcoat after the primer.New Concrete Paint:
New concrete floors require a curing period, typically ranging from 3-5 months after the floor is laid. This duration can vary based on the thickness and quality of the concrete. It’s advisable to consult with the supplier or fitter regarding the specific waiting time before painting.
Never pre-seal the floor prior to painting, particularly with latex or PVC sealers, as paint will not adhere properly.
Prime Colors
Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 08 E 51 Yellow, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 445 Tile Red, RAL 5012 Light Blue, WhiteTags
- 98 garage ,
- Anti Slip Floor ,
- Car Showroom Floor Paint ,
- Chemical Resistant Floor Paint ,
- Chemical Resistant Floor Paints ,
- Epoxy Coatings ,
- Epoxy Floor Paints ,
- Epoxy Sealers ,
- Floor Paint ,
- Garage Floor Paints ,
- Industrial Kitchen Floor Paint ,
- Non Slip Epoxy Floor Paints ,
- Non Slip Epoxy Paints ,
- Non-Slip Floor Paints ,
- Two Pack Epoxy ,