Rubber Pond Paint Chlorinated Rubber 3 In 1 Primer Sealer & Protects

7 Colour(s) Available

  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 20-40 Mins Touch Dry
  • Premium Gloss Finish For The Best Protection
  • Suitable For Concrete & Primed Metal or Fiberglass
  • Multi-Buy Discounts
  • Free Delivery Available

Regular price
£69.99 Inc. VAT
Sale price
Regular price
Exc. VAT
Sold out
Unit price
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.



Rubberised Pond Paint UK

Rubber Pond Paint Chlorinated Rubber Pond Paint product name Eurochlor 1 is excellent for use where good chemical resistance is needed it is widely used on artificial ponds that are made from fiberglass brick or concrete.

Chlorinated Rubber Pond Paint provides excellent elasticity so doesn’t crack when it is flexed and bent.

Is this pond paint fish safe?

All paints are harmful to aquatic organisms in its wet form however once fully cured (7days) there are no chemicals/solvents to leach out and cause harm with this coating.

PLEASE NOTE on our labeling the product Eurochlor 1 states "Harmfull To Aquatic Life With Long Lasting Effects" this only reflects on the product in its wet form, once the paint is used and allowed to cure (dry) for 7 days, the paint film is sealed and all solvents will have evaporated rendering the finishes product harmless.

PREMIUM POND PAINT Only supplied in gloss as semi gloss and matt finishes reduces the integrity and quality of the finish.

NEW 3 IN 1 TECHNOLOGY - Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete fiberglass & grp, Just 2 coats of this Two Pack Epoxy Swimming Pool & Pond Paint will prime seal and protect.


  • NEW 3 IN 1 TECHNOLOGY - Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete, Just 2 coats of this Chlorinated Rubber Swimming Pool & Pond Paint will prime seal and protect.
  • HIGH PERFORMANCE CHLORINARED RUBBER POND PAINT - Widely used on pools that are made from fiberglass, brick, or concrete.
  • PREMIUM GLOSS FINISH - Chlorinated Rubber Pond Paint is supplied in a gloss finish as matting the finish to a satin, semi-gloss or matt finish reduces the quality, integrity and effectiveness of the coating.
  • HIGHLY RESISTANT EASY CLEAN POND PAINT - Resistant to weathering along with many industrial and domestic chemicals, making it a perfect choice whether painting new projects or refurbishing an existing pool.
  • MULTI PURPOSE EASY APPLICATION CHLORINATED RUBBER PAINT- By Paint brush, roller & suitable spray to fiberglass, brick, & concrete.
  • CHLORINATED RUBBER KEY FACTS & BENEFITS - Coverage 10m2 per Litre | Touch Dry in 20-40 Mins| Overcoat 12-24 hours | Full protection and waterproof after 7 Days | No Catalyst Required | Multi Surface | Two coats recommended for best results.
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans

Application Guide

Easy to apply by brush, roller and suitable spray applications.

Two coats of paint are recommended for the best longest lasting finish, If painting concrete, thinning the first coat by 10%-20% with the specified thinners, to allow better absorption and provide a better key for the finishing coating of paint.

Brushes and rollers will need to be solvent resistant.

Painting Step By Step

  1. The area must be clean and free from dirt, dust, oil, grease and be dry & clear of any other contaminants. Good preparation is key to a good finish.
  2. Before you start, have your ppe ready as our paint is solvent based and will not wash off easily with soap and water.
  3. Stir the paint well before use with a paddle on a slow running drill or substantial stick.
  4. Thin the first coat by 10-20 percent, to assist good priming and sealing. If spray application it to be used thin to suit.
  5. Before putting paint down ensure you have good ventilation to allow solvent vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
  6. Cut in around the edges first (with a 2 to 3 inch brush if brush and roller application is being used), then work backwards towards your exit so as not to get boxed in.
  7. Apply a second coat 12-24 hours (overnight dry) after the first coat to build good colour and protection.

Application - Painting over existing paint 

Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.

Step 2 Clean and Abrade -

  • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
  • If there is flaking paint this must be removed prior to painting.
  • For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
  • Ensure substrate is clean of any dirt, oil, or grease

Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.

Application - Painting a bare substrate 

Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.

Step 2 Prime – Depending on the material you are painting will determine what primer you will need.  

Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.


Spray Application Guide

If applying with an air assisted or air assisted airless system - Use a 11-13 thou tip no thinners usually required. If thinning is necessary use around 10% Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.

If applying with a pot gun

Use a 1:2 to 1:4 tip set up thinning by 10% if required. More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.



Good Preperation of the is paramount to an excellent long lasting finish. Make sure substrate is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting espesally with laytex or PVC selaers paint will not stick.


New Concrete  will need time to green this generally is a period of 3-6 months from when the concrete is layed, we say 3-6 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete as to how long to wait till painting.



Always stir paint well prior to using

Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.





Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres

Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet

Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information

Prime Colors

Black, BS 00 A 05 Goosewing Grey, BS 18 B 25 Grey, BS 18 E 51 Delphinium Blue, BS 18 E 53 Regatta Blue, BS 20 E 51 Cornflower Blue, White


5 litre, 2.5 litre, 1 litre