Primer Undercoat for Wood and Metal Brush Roller & Spray Apply

3 Colour(s) Available


  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • High Build Anti Corrosive Zinc Phosphate
  • Versitile Multi Purpose Primer Undercoat
  • Multi-Buy Discounts
  • Free Delivery Available

Regular price
£48.99 Inc. VAT
Sale price
£48.99
Regular price
Exc. VAT
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
Disclaimer

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.

Description

Description

Primer Undercoat for Wood and Metal


Metal & Wood Primer Undercaot product name Universal PU Enamel is based on a polyurethane enamel resin with high anti corrosive properties which is suitable to be used on metal and wood but also concrete or brick along with other suitably prepared and primed substrates.

Metal & Wood Primer can be used in many different ways a few variations are metal paint, gates and railing paint, chassis paint, agricultural paint, wood paint, crane and lifting gear paint, skip & container paint, scaffold marking paint or stillage / pallet paints.


 

About This Item

  • UNIVERSAL PU ENAMEL WOOD AND METAL PRIMER;

    Specifically engineered for both indoor and outdoor applications, to provide vibrant colours and superior protection, unlike cheaper water-based alternatives.

  • PROTECTION: Offers anti-corrosive properties for bare mild steel and is a adhesion promoter ready for our top coats.

  • FAST DRYING TIME: Touch Dry in 2-4 hours, Overcoat 12 - 24 hours. Making this product perfect for outdoor use and for a DIY project.
  • EASY APPLICATION: Brush, roller and suitable spray application.
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre can.

Application Guide

  1. Before you start, have your PPE ready as our paint is oil based so will not wash off easily with soap and water.
  2. Abrade area prior to painting to remove old flaking paint and imperfections, to ensure good intercoat adhesion.
  3. The area must be dry and clean free from dirt, dust, oil, grease and clear of any other contaminants. Good preparation is key to a good finish.
  4. Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
  5. If brushing, thinning is not usually required but if you preferred to thin the product start at 5%.
  6. Cut in around the edges and hard to reach areas first.
  7. Once applied, 12-24 hours after finish with your chosen top coat.

Mixing

Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed to ensure colour is consistent throughout use.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.


Spraying Advise

 

If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.

More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.




If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.

If thinning is necessary use around 10%

Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.

 

 


About Us

T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.

Our Ethos

Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.

 


Our product titles and images are for advertising purposes only, this product will arrive as Universal PU Enamel, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.



Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres





Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet





Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information