Quick Drying Gloss Enamel Metal Paint
Quick Drying Enamel Metal Paint
- Fast Dry Time In as Little as 20-40 Mins Touch Dry
- Quick Drying Enamel Paint With UV Protection
- Spray Application By Brush & Roll In Small Areas
- Suitable For Metal Work
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £56.99 Inc. VAT
- Sale price
- £56.99
- Regular price
-
- Unit price
- /per
Find Your Perfect Colour
Adding product to your cart
Advice Line
Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk
Description
Quick Drying Enamel Metal Paint
Quick Drying Metal Paint For Spray Application product name is Eurospeed 1 which has a high gloss finish based on a quick drying enamel resin suitable for mild steel. This product is for spray application however it can be brushes/rolled on small surface areas.
Available in a high gloss and semi gloss primer finish. Our semi-gloss finish contains anti-corrosive pigments and can be used as a one coat direct to metal DTM primer finish, to mild steel substrates.
About ths product
- QD ENAMEL PAINT; Specially developed for industrial spray applications.
- WATERPROOF OUTDOOR PAINT: Exceptional coverage & does a great job of repelling rainwater and providing high protection from the harsh environmental elements. With long lasting UV protection.
- FAST DRYING TIME: Touch Dry in 30 -45 Minutes, Overcoat 1 - 24 hours.
- EASY APPLICATION: Best to be sprayed but you can brush/roller small surface areas.
- THINNERS T1000
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre can.
Application - Painting over existing paint
Step 1
Check suitability of the product to the existing paint. We recommend you try a sample area first. Quick drying paints cannot be applied over white spirit based paints as it will attack.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. Over coat 1-24 hours.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 1-24 hours after applying the primer you can add your first coat of topcoat. Wait another 1-24 hours and then apply the second coat.
Primers
Mild Steel – If you are painting mild steel you will need our Metal Primer to view this please Click here
Fibreglass – If the fibreglass is bare you will need a fiberglass primer. For Two Pack Epoxy Fiberglass Primer Click here. For Single Pack Fiberglass Primer Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here
Etch Primer – For One Pack Etch Primer. Click here
Aluminium – The primer suitable for aluminium is Two Pack Etch Primer. Click here
Other Application Advise
Always stir any paint well prior to using, as our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed to ensure colour is consistent throughout use.
Spraying Advise
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
Our product titles and images are for advertising purposes only, this product will arrive as Eurospeed 1, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.