Quick Drying All Colours and Finishes
DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.
Quick Drying All Colours and Finishes is based on a quick drying enamel resin suitable for mild steel suitable for spray application however it can be brushes/rolled on small surface areas.
Available in a high gloss and semi gloss finish. Our semi-gloss finish contains anti-corrosive pigments and can be used as a one coat application direct to metal, to mild steel substrates.
Thinners suitable T1000 Xylene
Things to Know
- Mix paint well before use and check colour before use.
- Make sure substrates are suitably prepared (lightly abraded and degreased)
- This product cannot be used over a brushing, white spirit based enamel's as it will attack it.
If applying with an air assisted or air assisted airless system - Use a 11-13 thou tip no thinners usually required. If thinning is necessary use around 10% Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
Use a 1:2 to 1:4 tip set up thinning by 10% if required. More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.