Step Paint for Wood Metal Concrete Stone Brick Brush Roller or Spray Apply

28 Colour(s) Available


  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • Quick & Easy To Use Perfect For Light To Medium Traffic
  • Suitable For Concrete, Metal, Wood, Stone & Brick
  • Multi-Buy Discounts
  • Free Delivery Available
Read full description
Regular price
£32.99 Inc. VAT
Sale price
£32.99
Regular price
Exc. VAT
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
Disclaimer

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.

Custom Description Image 1

Benefits of TA Paints

  • Easy Application - Saving you precious time
  • Fast Drying - Less likely to be ruined whilst drying as its not wet for long
  • Multi Application - Use across multiple surface finishes
Custom Description Image 2

Benefits

  • Multi surface use
  • Coverage 8-10 m2 per litre
  • Resistant to chemicals and the elementsHigh anti corrosion properties
  • Strong Polyurethane coating for new and refurbishment projects
  • Universal Mutli Surface Paint a one paint does all coating for concrete, metal, wood, timber & ply
Custom Description Image 3

Surface Preparation Checklist

  • Chemically or mechanically hardened floors may need abrasion prior to application
  • Remove old paint if necessary
  • Remove all loose and flaking materials then clean all dust and dirt from surface to assist good adhesion
  • Ensure surface is clean dry and free from any oil or grease that will contaminate the coating and prevent drying
  • Ensure surface is at ambient temperature prior to painting to avoid blooming and a slow dry time
Custom Description Image 4

Application Tips

  • Stir well before use with a substantial stick or metal stirrer
  • 1-2 coats recommended for best results depending on substrate. For example, porous substrates like wood and timber may need 2 coats, nonporous like metal with require 1 coat
  • Fibreglass & GRP will require a separate primer first
  • Apply by brush, roller, or suitable spray applications
  • Ensure good ventilation during and after application
  • Always wear proper PPE gloves, glasses and suitable clothing
Description

Description

Universal PU Step Paint

Introducing our Step Paint, formulated to enhance concrete, metal, wood, stone, and brick steps subjected to light to medium foot traffic. Crafted with polyurethane enamel, it delivers a robust, hard-wearing finish that ensures exceptional protection for your steps. Whether indoors or outdoors, our Step Paint offers outstanding UV resistance, safeguarding against the harsh effects of sunlight when used externally. Enjoy peace of mind knowing that your steps are fortified against wear and tear, both from regular use and environmental factors. Upgrade your space with confidence, courtesy of our Step Paint's superior durability and versatility.

This is paint is not suitable if you will be having vehicles using the area i.e. car’s, motor bikes and forklift trucks.

Like any painted surface when wet is slippery, we do offer a non-slip version which is a rough textured finish. Click here for our Non Slip Floor Paint.


 

 

 



Key Facts 

  • Can be brushed, roller or spray applied.
  • Do not pre seal concrete with latex or PVC sealers paint will not adhere.
  • Easy clean, high gloss finish
  • Touch Dry 2-4 hours
  • Over coat 12-24 hours
  • Thinners suitable T0001 White Spirit
  • Covers Approx. 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)
  • Suitable for light to medium foot traffic (Two pack epoxy floor paint is required for vehicles)
  • Two Coats recommended for best results.
  • No Primer needed just apply two coats. First coat will act as a primer once thinned by 20% (applicable to concrete and wood)
  • Multi application suitable for Primed Metal, Wood, Timber Concrete and primed Fibreglass/GRP



Mixing and Thinning
Thinners required are White Spirit T0001.
Make sure you use a mixer on a slow running drill, pallet knife or a broom stick that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.



Application - Painting over existing paint 

Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.


Step 2 Clean and Abrade -

  • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
  • If there is flaking paint this must be removed prior to painting.
  • For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
  • Ensure substrate is clean of any dirt, oil, or grease

Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.

 



Application - Painting a bare substrate 

Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.

Step 2 Prime – Depending on the material you are painting will determine what primer you will need.  

Metal - click here

Wood, Concrete, Stone or Brick - No primer required. First coat will prime and seal. We recommend that on your first coat thin by 20% to ensure it impregnates the substrate. Then

Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.

 

 

Good Preparation of the floor is paramount to an excellent long lasting finish. Make sure floor is dry and clean from dust, dirt, moisture, oil etc before painting. Never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.

 


New Concrete Floors will need time to green this generally is a period of 3-6 months from when the concrete floor is laid, we say 3-6 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete floor as to how long to wait till painting.

 

 



 

 

 


Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres





Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet





Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information

Prime Colors

Clear Sealer, Gloss White, Gloss Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 04 E 53 Red, BS 08 E 51 Yellow, BS 10 C 31 Cream, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 105 Blue, BS 106 Blue (Blue Black), BS 108 Blue, BS 224 Deep Bronze Green, BS 226 Middle Brunswick Green, BS 227 Deep Brunswick Green, BS 538 Post Office Red, RAL 2004 Orange, RAL 5002 Blue, RAL 5010 Blue, RAL 5012 Blue Blue, RAL 5015 Sky Blue, RAL 5017 Blue, RAL 6011 Green, RAL 6018 Kawasaki Green, RAL 7024 Grey, Tile Red

Size

1 Litre