Concrete Floor Dust Sealer Clear 3 in 1 Primer Sealer & Protects

  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • Quick & Easy To Use Perfect For Light To Medium Traffic
  • Suitable For Concrete, Metal, Wood, Stone & Brick
  • Multi-Buy Discounts
  • Free Delivery Available

Regular price
£49.99 Inc. VAT
Sale price
Regular price
Exc. VAT
Sold out
Unit price
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.



Concrete Floor Sealer/Primer

Concrete Floor Dust Sealer Clear Primer and Sealer product name Universal PU Enamel is a single pack clear paint that can be used on bare concrete for light to medium foot traffic which can be used in two ways.

Firstly, this product is a concrete primer suitable to be applied to bare concrete once the correct preparation has been carried out. This will impregnate the concrete offering good intercoat adhesion ready for the two coats of top coat.

Secondly this product can be used as a sealer to seal off bare concrete to stop dusting. If you are not planning to put a coloured top coat on we recommend using two coats of this.

Please note this is not a translucent clear due to the natural colouring of the resin this does have a yellow tinge.


About Concrete Floor Paint

  • NEW 3 IN 1 TECNOLOGY - Primes Seals and Protects with just 2 coats.
  • EASY CLEAN FLOOR SEALER- Resistant many industrial and domestic chemicals, Resistant to regular washing with water due to the easy clean finish, making it a perfect choice as a concrete garage floor paint or workshop floors.
  • MULTI PURPOSE EASY APPLICATION FLOOR PAINT- By Paint brush, roller & suitable spray application to a garage floors workshop floor or industrial factory floor for concrete wood stone brick & suitably primed and prepared metal.
  • FLOOR PAINT KEY FACTS & BENEFITS - Coverage 8-10m2 per Litre | Touch Dry in 2-4 hours | Overcoat 12 - 24 hours | Traffic in 2-3 days of final coat |Full protection and scratch protection 7 Days | Suitable for light to medium traffic | No Catalyst Required | Multi Surface | Two coats recommended for best results | Solvent Based Polyurethane Coating.
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only.


Painting your Floor Step By Step

  1. The floor area must be clean and free from dirt, dust, oil, grease and be dry good preparation is key to a good finish.
  2. Stir the paint well before use thinning the first coat by 10 percent, to assist good priming and sealing of the floor.
  3. Before you start have your PPE ready as our paint is oil based so will not wash off easily with soap and water.
  4. Before putting paint on the floor ensure you have good ventilation to allow solvent vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
  5. Cut in around the edges first with a 2 to 3 inch brush, then work backwords towards your exit so you do not to get boxed in.
  6. When painting larger areas its easier to pour the paint on the floor in stages, spread it out using a squeegee then back roll with a roller to release the air, to avoid having a bubbly finish as the air is trapped in the coating during the drying process.
  7. Apply a second coat 12-24 hours (overnight dry) after the first coat to build good colour and protection.

Good Preparation of the floor is paramount to an excellent long lasting finish. Make sure Floor is clean from dust, dirt, moisture, oil etc before painting. and never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.

New Concrete Floors  will need time to green this generally is a period of 3-6 months from when the concrete floor is laid, we say 3-6 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete floor as to how long to wait till painting.


Always Stir Floor Paint Well Before Use Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.



About Us

T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.


Our Ethos

Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.

Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres

Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet

Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information