Two Pack Epoxy Zinc Phosphate Metal Floor Primer

1 Colour(s) Available

  • Application By Brush Roller & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • High Anti corrosion & Chemical Protection for Metal
  • High Build Anti Corrosive Zinc Phosphate
  • Multi-Buy Discounts
  • Free Delivery Available
£78.99 Inc. VAT
£78.99
Exc. VAT
Sold out
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
Disclaimer

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.

Description

Description

Two Pack Epoxy Zinc Phosphate Metal Floor Primer is a durable and heavy-duty coating designed to provide excellent adhesion and corrosion resistance for metal floors. This primer offers exceptional protection in high-traffic and industrial environments.

Suitable for warehouses, factories, workshops, and other demanding environments where floors endure heavy loads and abrasion.

 

Important Notice:

Do not apply two pack epoxy paint in temperatures below 10 degrees Celsius, as the cross-linking of the paint and catalyst will not occur, preventing the coating from fully drying.

    About Two Pack Epoxy Zinc Phosphate Floor Primer:

    • SUITABLE SUBSTRATES: Metal
    • APPLICATION: Can be applied using a brush, roller, or spray method.
    • MIXING RATIO: The mixing ratio 4:1. 4 parts paint to 1 part hardener. 
    • POT LIFE: Once the components are mixed, the pot life is around 4-6 hours.
    • COVERAGE: Approximately 8 square metres per litre. This does not account for the method of application, absorption of substrate or wastage.
    • DRYING TIMES: Touch dry in 2-4 hours and full curing takes 7 days.
    • THINNERS: T0200 Epoxy thinner 
    • Proudly manufactured in England by B.C Paints Ltd. Images and product titles are for advertising purposes only; tins are supplied in BC Paints cans or plain white for 1 and 2.5, and occasionally 5 litre cans.

     

    Mixing Advice:

    • Use a mixer on a slow-running drill or a palette knife on smaller cans to mix the paint and catalyst together. An egg whisk, screwdriver, or small stick that doesn’t reach the bottom of the can is insufficient for proper mixing.
    • Mix for 3-5 minutes, allow to stand for a minute, and then repeat.
    • Combine the catalyst into the can before pouring it into a paint tray. 
    • If you are thinning the paint, this is added once the paint has been catalysed.
    • Ensure all components are thoroughly mixed to avoid any colour inconsistencies or drying issues.

     

    Application - Painting Bare Metal:

    Step 1 - Prep: Ensure the substrate is completely dry and free of any dirt, oil, or grease by using a degreaser.

    Step 2 - Prime: Apply one coat of the Two Pack ZP Floor Primer.

    Step 3 - Topcoat: Once the previous steps are complete, apply your first coat of Two Pack Epoxy Topcoat.


     


     


     

     

     


    Additional Information

    Prime Colors

    Grey

    Tags

    Size

    5 Litre, 2.5 Litre, 1 Litre