Quick Drying Agricultural Metal Primer HB AC Zinc Phosphate

  • Fast Dry Time In as Little as 20-40 Mins Touch Dry
  • Quick Drying Enamel Paint With UV Protection
  • Spray Application By Brush & Roll In Small Areas
  • Suitable For Metal Work
  • Multi-Buy Discounts
  • Free Delivery Available
Regular price
£48.99 Inc. VAT
Sale price
£48.99
Regular price
Exc. VAT
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
Disclaimer

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.

Description

Description


Quick Drying Agricultural Metal Primer

Quick Drying Agricultural High Build Zinc Phosphate Metal Primer product name is Europrime 1 High Build Zinc Phosphate based on a quick drying enamel resin suitable for mild steel. This product is for spray application however it can be brushes/rolled on small surface areas.

Quick Drying Agricultural High Build Zinc Phosphate Metal Primer can be used in many ways a few variations are structural steel and agricultural fabrications and metal work.


About This Item

  • HIGH PERFORMANCE QD HB ZINC PHOSPHATE ANTI CORROSIVE METAL PRIMER - Hard wearing quick drying high build primer.
  • HIGH ANTI CORROSION PROTECTION PRIMER PAINT - A perfect choice to help freshen up old paint work or providing a new project with a quality professional finish.
  • KEY FACTS & BENEFITS - Coverage 10m2 per Litre. Touch Dry in 30-45 mins, Overcoat 1 - 24 hours. Providing good weathering resistance. No Catalyst Required. High coverage and opacity. Two coats recommended for best results.
  • EASY APPLICATION-By Solvent Resistant paint brush, roller in small areas & suitable spray application to mild steel and other suitable prepared surfaces.
  • MULTI PURPOSE PU PAINT - Only the finest raw materials are used in our coatings to provide the best finish every time
  • Thinners T1000
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans

Application Guide

Two coats of paint are recommended for the best longest lasting finish.

If brushing thinning is not usually required but if you preferred to thin the product 10%

Remember good preparation is paramount to an excellent long lasting finish.

Painting Guide Step By Step

  1. Abraid area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates.
  2. The area must be clean and free from dirt, dust, oil, grease, old flaking paint and be dry & clear of any other contaminants. Good preparation is key to a good finish.
  3. Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
  4. Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
  5. Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
  6. Depending on what you're painting, apply a second coat or a top coat 2-12 hours or an overnight dry after the first coat to build good colour and protection.


Application - Painting over existing paint 

Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.

Step 2 Clean and Abrade -

  • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
  • If there is flaking paint this must be removed prior to painting.
  • For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
  • Ensure substrate is clean of any dirt, oil, or grease

Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.


Application - Painting a bare substrate 

Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.

Step 2 Prime – Depending on the material you are painting will determine what primer you will need.  

Step 3 Topcoat – 1-24 hours after applying the primer you can add your first coat of topcoat. Wait another 1-24 hours and then apply the second coat.


 

Other Application Advice

Always stir any paint well prior to using, especially if using Two Pack products.

Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.


If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.

More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.




If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.

If thinning is necessary use around 10%

Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.

 


QD METAL PRIMER

QD Metal Primer is based on a quick drying enamel resin making it very versatile in its application and covering a wide range of uses. Our product titles are for advertising purposes only, this product will arrive as Europrime 1 HB ZP Primer tins supplied will be similar to that shown above, manufactured by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.

 


 


About Us

T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.

 

Our Ethos

Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never comprom



Additional Information