High Temperature Paint 160°
- Fast Dry Time In as Little as 20-40 Mins Touch Dry
- Quick Drying High Temperature Enamel Upto 160 Degrees C
- Spray Application By Brush & Roll In Small Areas
- Suitable For Metal Work
- Regular price
- £79.99 Inc. VAT
- Sale price
- £79.99
- Regular price
-
- Unit price
- per
DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable
Description
HIGH TEMP PAINT ENGINE/EXHAUST/ LOG BURNING STOVE PAINTS 160°
High Temp Paint is manufactured and supplied by T.A Paints Ltd in three levels of High temperature paint starting with up to 160 degrees c to up to 250 degrees c to the highest at 700 degrees c. These high temperature paints are perfect for arias prone to high temperatures such as log burners, exhausts, engines and flue pipes for items like boats and barges, military vehicles, plant machinery, agricultural machinery and many more.
Key Facts
- Touch Dry in 30 mins.
- Overcoat in 12-24 Hours
- Full Dry in 7 Days
- Thinners if required QD Thinners T1000.
- Coverage 8 squared metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
- Application by suitable spray application, brush or roller in smaller areas
- Suitable for metal & suitably primed substrates
Things to know
- Mix paint well before use and check colour before use.
- Semi-Gloss contain anti-corrosive pigments and can be applied direct to mild steel. It is recommend to use a suitable Zinc Phosphate Primer when applying the gloss finish to bare mild steel.
- For the best anti-corrosion protection to metal use a suitable primer first.
- Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
- When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
- Temperature will affect drying times but will not prevent curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
- Suitable for use on steel, wood, concrete, and other suitably prepared and primed substrates.
- If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.
- To ensure the coating cures correctly, the painted surface must be heated gradually and allowed to cool before reaching its full temperature limits.
Recommended Tip Size
Pot Guns: 1.4mm
Airless: 11 thou
Air assisted Airless: 11 thou
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.