Two Pack Epoxy Floor Primer and Sealer

Regular price
£30.00 Exc. VAT
Sale price
£30.00
Regular price
Exc. VAT
Sold out
Unit price
per 
Shipping calculated at checkout.

Description

    Two Pack Epoxy Floor Primer and Sealer


    Firstly, this product is a concrete primer suitable to be applied to bare concrete once the correct preparation has been carried out. This will impregnate the concrete offering good intercoat adhesion ready for the two coats of our Two Pack Epoxy Top Coat.

    Secondly this product can be used as a sealer to seal off bare concrete to stop dusting. If you are not planning to put a coloured top coat on we recommend using two coats of this.

    For use on garage, industrial factory, warehouse, industrial kitchen and shop floors to provide a highly protective and hard wearing coating with excellent chemical resistance.

    Please note although Two Pack Epoxy coating’s offer the best chemical resistance and protection from the elements, the colours will chalk and fade in external applications.

    Please note this is not a translucent clear due to the natural colouring of the resin this does have a yellow tinge.

     

    Key Facts

    Mixing ratio 4 parts paint to 1 part catalyst
    Once catalysed pot life if 4-6 hours
    Touch Dry in 2-4 Hours.
    Overcoat in 12-24 Hours
    Full Dry in 7 Days
     Suitable for heavy traffic
    Coverage 8 square metres per litre (this does not account for the method of application, absorption of substrate or wastage)

    Suitable for concrete and brick

     

    Important Information

    • Make sure the concrete is clean and any loose dust or bits have been swept or hoovered prior to painting.
    • Two Pack Epoxy can not be applied over a single pack primer or sealer as this will attack the existing coating.
    • Epoxies won’t cure in temperatures below 10 degrees c. If you can add heat into the area this has to be dry heat NOT gas heat.

     

     

    Mixing Epoxies

    1. Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix (An egg whisk, screwdriver or small stick that doesn’t reach the bottom of the can is not sufficient enough)
    2. Mixing should take place for 3-5 minutes allow to stand for a minute and repeat.
    3. Mix the catalyst in to tub before tipping into a paint tray
    4. Ensure all the content is properly mixed to avoid colour and or drying problems

     

     

    New Concrete

    New concrete floors or will need time to green this generally is a period of 3 months from when the concrete floor is laid, we say 3 months as it depends on the thickness of the concrete and quality, it’s always best ask the supplier and fitter of the concrete floor as to how long to wait till painting.