Hammer Finish Metal Paint 5 Litre Quick Drying Decorative Hammer Pattern Paint
- Fast Dry Time In as Little as 20-40 Mins Touch Dry
- Quick Drying Hammer Finish Decorative Paint
- Spray Application By Brush & Roll In Small Areas
- Suitable For Metal Work
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £59.99 Inc. VAT
- Sale price
- £59.99
- Regular price
-
- Unit price
- per
Description
QD Hammer Finish Metal Paint
- QD HAMMER FINISH METAL PAINT; Specially developed for decorative industrial spray applications.
- WATERPROOF OUTDOOR PAINT: Exceptional coverage & does a great job of repelling rainwater and provides protection from the harsh environmental elements with long lasting UV protection.
- FAST DRYING TIME: Touch Dry in 30 -45 Minutes, Overcoat 1 - 24 hours.
- EASY APPLICATION
- THINNERS T1000
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre can.
Application Guide
Two coats of paint are recommended for the best longest lasting finish.
Remember good preparation is paramount to an excellent long lasting finish.
- Abrade area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates.
- The area must be clean and free from dirt, dust, oil, grease, old flaking paint and be dry & clear of any other contaminants. Good preparation is key to a good finish.
- Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
- Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
- Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
- Depending on what you're painting, apply a second coat 1-12 hours or an overnight dry after the first coat to build good colour and protection.
Primers
Mixing Information
Always stir any paint well prior to using,
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed to ensure colour is consistent throughout use.
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Spraying Information
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
Our product titles and images are for advertising purposes only, this product will arrive as Eurospeed 6, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.