Description
Universal PU Non Slip Deck Paint
Non Slip Home Deck Paint is a single pack polyurethane paint with an aggregate already mixed in which makes a rough, textured finish that is ready to use of the can (after you have thoroughly stirred the paint)
Non Slip Deck paint which is suitable for Metal, Wood, Concrete and primed Fibreglass/GRP decks where light foot traffic will occur.
The non slip aggregate reduces the risk of accidents. However, like any painted surface, it can still be slippery when wet.
About This Item
- NEW 3 IN 1 TECHNOLOGY - Primes, Seals and Protects with just 2 coats.
- NON SLIP FLOOR PAINT: Polyurethane White Spirit based, High Quality & Durable Anti Slip finish that reduces the risk of accidents.
- FAST DRYING TIMED: Touch Dry in 2-4 hours, Overcoat 12 - 24 hour, full protection in 7 days. We recommend two coats for best result.
- READY TO USE SIMPLE APPLICATION: Aggregate already mixed in. Can be applied by brush or roller.
- TOP TIP when applying 2 coats use our smooth floor paint first this makes the job more economical allong with being easier to apply the non slip on top of a smooth finish first coat
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans
Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Before you start, have your PPE ready as our paint is oil based so will not wash off easily with soap and water.
- Ensure substate is completely dry and is clean of any dirt, oil, or grease.
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- Ensure you have good ventilation to allow solvent vapor to escape, if there is no air movement the coating will not dry as well.
- Any rust will need to be removed back to bare metal and spot prime with our metal primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat. Apply a second coat 12-24 hours after the first coat.
Cut in around the edges first with a 2 to 3 inch brush, then work backwards towards your exit.
Application - Painting a bare substrate
Never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.
Step 1 - Ensure substrate completely dry and is clean of any dirt, oil, or grease.
Before putting paint on the floor ensure you have good ventilation to allow solvent vapor to escape, if there is no air movement the coating will not dry as well.
Step 2 Prime –Concrete is a porous material so we recommend on the first coat to thin it by 20% to ensure it impregnates the concrete, this will act as your primer / sealer. We also recommend that you use a standard concrete paint for the first coat for ease of application and it will keep the cost down. Click here
Metal you will need to prime with our metal primer. Click here
Fibreglass/GRP you will need to prime with our fibreglass primer. Click here
Step 3 Topcoat – 12-24 hours after applying the first coat you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Cut in around the edges first with a 2 to 3 inch brush, then work backwards towards your exit.
When painting large areas, it's easier to pour the paint on the floor in stages, spread it out using a squeegee then back roll with a roller to release the air, to avoid having a bubbly finish as the air is trapped in the coating during the drying process.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality over price.
Our product titles and images are for advertising purposes only, this product will arrive as Universal PU Enamel Non Slip, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.