2k Poly

2k Poly
Regular price
£42.50 (  £51.00 including VAT )
Sale price
£42.50
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.As these colour and finishes are made to order they are non-returnable/refundable

Description

DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purposes only – 1 & 2.5 Litre cans are not screen-printed cans.

2K Polyurethane

 

Two Pack 2K Polyurethane is a high performance 2k poly compliant coating consisting of an acrylic modified pigmented base coupled with an isocyanate polymer based hardener. The product provides a tough and durable mirror-like gloss film with excellent chemical and solvent resistance coupled with very fast drying and rapid cure. Designed for the coating of commercial vehicles, trailers, chassis and agricultural equipment, the fully cured coating is hard wearing and durable and demonstrates excellent resistance to weathering.

Perfect for use on agricultural, commercial and industrial vehicles to include military vehicle paint plant machinery paint, as well as providing a prestigious finish when used as a general metal fabrication paint.

The mixed product contains isocyanate. To ensure the protection of sprayers and other personnel in the vicinity of the painting operation, please read the Material Safety Data Sheet before use.

 

Keys Facts

  • Mixing Ratio 2:1
  • Touch dry:2 – 3 Minutes
  • Handleable within:4 – 6 Hours
  • Hard dry:12 Hours
  • Full properties: 7 days
  • Can touch in with brush
  • Suitable for use over a range of compliant primers; as well as suitably prepared existing finishes.
  • Approximately 13 – 14m2per litre based on a dry film thickness of 50 microns, depending on application method and substrate.

 

Spray gun recommendations

HVLP:

Fluid tip: 2.0 – 2.2mm (Suction feed) 1.0 – 1.2mm (Pressure feed)

For application by HVLP a working pressure of 3 bar is recommended.

Apply two full coats with a flash off of 5 – 10 minutes between coats to allow solvent evaporation.

Airless and air assisted airless:

0.22 – 0.28 mm (9-11 thou) tip size, 40-60°C angle at 90-120 bar (1350-1800 psi)

Apply one light and one full coat (40 – 50 microns)