AGRICULTURAL TRACTOR & TRAILER PAINT
Agricultural Paint is based on a polyurethane enamel resin that can be used in many different applications on properly prepared new and refurbished agricultural machinery and equipment
It can be brushed, rolled and sprayed.
Touch Dry 2-4 hours
Over coat 12-24 hours
Thinners suitable T0001 White Spirit
Covers Approx. 8 square meters per litre (We cannot be held responsible for the method of application, absorption of substrate or wastage)
Suitable for Metal, Primed Fiberglass, Wood, Concrete and Brick.
Shelf life - 12 months from batch date
This product is not suitable for the following
- Tiles of any sort
- Bare aluminium you will need an etch primer
- Untreated galvanised steel
- A hot surface the reaches above 160 ̊C you will need High Temperature Paints
Mixing and Thinning
Make sure you use a broom stick, mixer on a slow running drill or pallet knife that reaches the bottom of the can and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.
Thinners required are White Spirit T0001. If thinning is required when applying by a brush or roller start by gradually adding 5% but do not thin more an 10% as the paint won’t cover
As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Application - Painting over existing paint
Step 1 Clean - Ensure substate is clean of any dirt, oil, or grease
Step 2 Abrasion – Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
If there is flaking paint this must be removed prior to painting.
For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.
Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.
It is important to do a test area when painting over existing paint.
Application - Painting a bare substrate
Step 1 Clean - Ensure substate is clean of any dirt, oil, or grease.
Step 2 Prime – Depending on the material you are painting will determine what primer you will need.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Clear Sealer, Gloss White, Semi-Gloss White, Matt White, Gloss Black, Semi-Gloss Black, Matt Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 04 E 53 Red, BS 08 E 51 Yellow, BS 10 C 31 Cream, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 105 Blue, BS 106 Blue (Blue Black), BS 108 Blue, BS 224 Deep Bronze Green, BS 226 Middle Brunswick Green, BS 227 Deep Brunswick Green, BS 538 Post Office Red, RAL 2004 Orange, RAL 5002 Blue, RAL 5010 Blue, RAL 5012 Blue, RAL 5015 Sky Blue, RAL 5017 Blue, RAL 6011 Green, RAL 6018 Kawasaki Green, RAL 7024 Grey, Tile Red, RAL 5012 Blue Blue
1 litre, 2.5 litre