Skip & Container Metal Primer High Build Zinc Phosphate Brush Roller & Spray Application
3 Colour(s) Available
- Application By Brush Roller & Suitable Spray
- Fast Dry Time In as Little as 2-4 Hours Touch Dry
- High Build Anti Corrosive Zinc Phosphate
- Versitile Multi Purpose Primer Undercoat
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £48.99 Inc. VAT
- Sale price
- £48.99
- Regular price
-
- Unit price
- per
Description
SKIP & CONTAINER HIGH BUILD
ZINC PHOSPHATE METAL PRIMER
About this item
- UNIVERSAL SKIP & CONTAINER A/C METAL PRIMER: Specifically engineered with anti-corrosive properties to effectively shield metal surfaces, preventing rust and corrosion.
- MULTI PURPOSE: It's versatile and can be used to paint bare metal or over pre existing paint.
- FAST DRYING TIME: Touch Dry in 2-4 hours, Overcoat 12 - 24 hours
- EASY APPLICATION: With a solvent-resistant brush roller and compatibility with suitable spray application methods, achieving a smooth and even coat is effortless.
- THINNERS T0001 White Spirit.
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre can.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime.
- Ensure substrate is clean of any dirt, oil, or grease.
Step 3 Prime – Apply first coat of primer
Step 4 Topcoat- Once you have completed the following steps 12-24 hours after you can apply the first coat of top coat.
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is dry and clean of any dirt, oil, or grease.
Step 2 Prime – Apply first coat of of primer.
Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.
Mixing Advise
Always stir any paint well prior to using, as our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed to ensure colour is consistent throughout use.
Spraying Advise
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
Other Primers
Fibreglass – If the fibreglass is bare you will need a fiberglass primer. For Two Pack Epoxy Fiberglass Primer Click here. For Single Pack Fiberglass Primer Click here
Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here
Aluminium – The primer suitable for aluminium is One Pack Etch Primer. Click here
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
Our product titles and images are for advertising purposes only, this product will arrive as Universal PU Enamel, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.