Quick Drying Skip & Container HB Anti Corrosive Zinc Phosphate Metal Primer
5 Colour(s) Available
- Fast Dry Time In as Little as 20-40 Mins Touch Dry
- High Build Anti Corrosive Zinc Phosphate
- Quick Drying Primer Undercoat
- Spray Application By Brush & Roll In Small Areas
- Multi-Buy Discounts
- Free Delivery Available
- Regular price
- £48.99 Inc. VAT
- Sale price
- £48.99
- Regular price
-
- Unit price
- per
Description
Quick Drying Skip and Container Primer
Introducing Europrime 1 High Build Zinc Phosphate Skip & Container Primer – a rapid-drying solution formulated with enamel resin tailored for mild steel. This primer isn't just quick-drying; it boasts high anti-corrosive properties, providing robust protection against rust and deterioration.
Designed primarily for spray application, it's versatile enough to also be brushed or rolled onto smaller surface areas. Trust Europrime 1 to provide reliable protection and durability for your industrial needs, ensuring your waste management equipment, including skips, containers, crushers, tipping skips, and cabins, remain resilient against corrosion in challenging environments
About this Item
- QUICK DRYING SKIP & CONTAINER HB A/C METAL PRIMER: Specially developed to prime and protect waste management products and equipment.
- QD PROTECTIVE INDUSTRIAL ANTI CORROSIVE METAL PRIMER UNDERCOAT: Exceptional coverage & does a great job at providing high anti corrosion protection from the harsh environmental elements.
- FAST DRYING TIME: Touch Dry in 20 - 30 Minutes, Overcoat 1 - 24 hours
- EASY APPLICATION: Suitable to be sprayed but can be brushed or rolled on a small surface area.
- THINNERS T1000 Xylene.
- Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre can.
Application - Painting over existing paint
Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.
Step 2 Clean and Abrade -
- Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
- If there is flaking paint this must be removed prior to painting.
- For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
- Ensure substrate is clean of any dirt, oil, or grease
Step 3 Prime – Once you have completed the following steps you can apply the primer
Step 4 Topcoat- 1-24 hours after you can apply the first coat of top coat
Application - Painting a bare substrate
Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.
Step 2 Prime – Apply this primer
Step 3 Topcoat – 1-24 hours after applying the primer you can add your first coat of topcoat.
Other Application Advise
Always stir any paint well prior to using, as our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.
Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed to ensure colour is consistent throughout use.
Spraying Advise
If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.
More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.
If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.
If thinning is necessary use around 10%
Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.
About Us
T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.
Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, this is why all the labelling is from B.C Paints, but it's still us.
Our Ethos
Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.
Calculate Your Solvent Paint
Total Sqm:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.
Total Sqf:
Quantity Needed:
Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.