One Coat Direct To Metal Paint
Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
  • Load image into Gallery viewer, One Coat Direct To Metal Paint
  • Load image into Gallery viewer, Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
  • Load image into Gallery viewer, Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
  • Load image into Gallery viewer, Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply
  • Load image into Gallery viewer, Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply

Direct to Metal Paint One Coat Primer Finish A/C Brush Roller Spray Apply

  • Application Brush & Roll & Suitable Spray
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • One Coat Anti Corrosive Direct To Metal Semi Gloss Primer Finish
  • Suitable For Metal, Wood, Concrete, Stone & Brick
Regular price
£79.99 Inc. VAT
Sale price
£79.99
Regular price
Exc. VAT
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Bulk Discount Qty Multi-buy Price Off Per Item
Buy 2 or more £2.50 Off Each
Buy 3 or more £3.30 Off Each
Buy 4 or more £4.00 Off Each
Buy 4 or more (5L Only) 30% Off Each
Buy 8 or more (5L Only) 35% Off Each
Buy 12 or more (5L Only) 45% Off Each
Buy 20 or more (5L Only) 50% Off Each

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

DISCLAIMER: The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here. As these colour and finishes are made to order they are non-returnable/refundable

Description

Description

Direct to Metal Paint Primer Finish One Coat Anti Corrosive

Direct To Metal Paint One Coat Primer Finish Anti Corrosive Zinc Phosphate Direct to Metal Paint Brushing Spraying Enamel paint is a semi-gloss finish primer finish.

Our semi-gloss one coat direct to metal finish contains anti-corrosive pigments and can be used as a one coat application, to mild steel substrates.

This product can be used for many different applications such as metal paint, gates and railing paint, chassis paint, agricultural paint, crane and lifting gear paint, skip & container paint, scaffold marking paint or stillage / pallet paints.

 

About this item

  • UNIVERSAL MULTI-PURPOSE  DIRECT TO METAL PAINT: Specially developed for outdoor use to colour and protect outdoor projects and to be superior to cheap water based alternatives. Providing a one coat anti corrosive primer finish solution.
  • WATERPROOF OUTDOOR PAINT: Exceptional coverage & does a great job of repelling rainwater and providing high protection from the harsh environmental elements, With long lasting UV protection.
  • MULTI PURPOSE: It's versatile and can be used in home garden and industrial aplications like fence panels, garden arches, benches, sheds, fences, arbours, summer houses, trellis, garden patio furniture, gates and railings, skips & containers, buildings steel fabrications and much more
  • FAST DRYING TIME: Touch Dry in 90 - 120 Minutes, Overcoat 12 - 24 hours making this product perfect for outdoor use and for a DIY project
  • EASY APPLICATION: Brush roller and suitable spray application.
  • Thinners suitable T0001 White Spirit
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans

Application Guide

Two coats of paint are recommended for the best longest lasting finish.

If brushing thinning is not usually required but if you preferred to thin the product 10%

Remember good preparation is paramount to an excellent long lasting finish.

Painting Guide Step By Step

  1. Abraid area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates.
  2. The area must be clean and free from dirt, dust, oil, grease, old flaking paint and be dry & clear of any other contaminants. Good preparation is key to a good finish.
  3. Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
  4. Stir the paint well before use, with a paddle on a slow running drill or substantial stick.
  5. Thin the first coat by 10 percent with T0001 if painting wooden surfaces, to assist good absorption.
  6. Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
  7. Cut in around the edges and hard to reach areas first with brush, if brushing and rolling is your application method.
  8. Depending on what you're painting, apply a second coat 2-12 hours or an overnight dry after the first coat to build good colour and protection.


Application - Painting over existing paint 

Step 1 - Check suitability of the product to the existing paint. We recommend you try a sample area first.

Step 2 Clean and Abrade -

  • Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion.
  • If there is flaking paint this must be removed prior to painting.
  • For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer.
  • Ensure substrate is clean of any dirt, oil, or grease

Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

Step 4 Topcoat- Once you have completed the following steps you can apply your top coat.


Application - Painting a bare substrate 

Step 1 Clean - Ensure substrate is clean of any dirt, oil, or grease.

Step 2 Prime – Depending on the material you are painting will determine what primer you will need.  

Step 3 Topcoat – 12-24 hours after applying the primer you can add your first coat of topcoat. Wait another 12-24 hours and then apply the second coat.

Primers

Fibreglass – If the fibreglass is bare you will need a fiberglass primer. For Two Pack Epoxy Fiberglass Primer Click here. For Single Pack Fiberglass Primer Click here

Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer. Click here

Etch Primer – For One Pack Etch Primer. Click here

Aluminium – The primer suitable for aluminium is Two Pack Etch Primer. Click here

 

Other Application Advice

Always stir any paint well prior to using, especially if using Two Pack products.

Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.


If applying with a pot gun
If applying with a pot gun
Use a 1:2 to 1:4 tip set up thinning by 10% if required.

More thinners may be added to achieve good atomization to achieve better flow of the paint giving a better finish.




If applying with an airassisted or airassisted airless system
Use a 11-13 thou tip no thinners usually required.

If thinning is necessary use around 10%

Set air and paint pressures until good atomization is achieved and fingering (lines in the spray) have blended in.

 

Universal PU Enamel

Universal PU Enamel is based on a white spirit polyurethane enamel resin making it very versatile in its application and covering a wide range of uses. Our product titles are for advertising purposes only, this product will arrive as Universal PU Enamel tins supplied will be similar to that shown above, manufactured by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.


 


About Us

T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.

 

Our Ethos

Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never comprom




 

 


Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres





Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet





Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information