Anti Slip Decking Paint for Wood,Timber, Metal and Concrete

9 Colour(s) Available


  • Application By Brush and Roller
  • Fast Dry Time In as Little as 2-4 Hours Touch Dry
  • Quick & Easy To Use Non Slip Finish
  • Suitable For Concrete, Metal, Wood, Stone & Brick
  • Multi-Buy Discounts
  • Free Delivery Available

Regular price
£62.99 Inc. VAT
Sale price
£62.99
Regular price
Exc. VAT
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.
Download Our Colour Charts

Free delivery is available for this product. Order today!

Advice Line

Need more information about our products? Give us a call on 01902 954948 or email us at sales@taindustrialpaints.co.uk

This product is not suitable for the following
  • Tiles of any sort
  • Unprimed plastic
  • Bare aluminium (you will need a suitable etch primer)
  • Untreated galvanised steel (Mordant solution first)
  • A hot surface that reaches above 106 degrees (C) (you will need high temperature paints)
Disclaimer

The colours shown on the images are for guidance only. The displayed colour will depend on your monitor and browsers. The finished colour therefore may not be as shown here.

All pictures are for illustration purpose only - 1 & 2.5 Litre cans are not screen-printed cans.

Description

Description

Universal PU Non Slip  Deck Paint

Non Slip Home Deck Paint is a single pack polyurethane paint with an aggregate already mixed in which makes a rough, textured finish that is ready to use of the can (after you have thoroughly stirred the paint)

Non Slip Deck paint which is suitable for Metal, Wood, Concrete and primed Fibreglass/GRP decks where light foot traffic will occur.

 

 


New 3 In 1 Formulation

NEW 3 IN 1 TECNOLOGY

Primes Seals and Protects with just 2 coats. No Primer or sealer for concrete 2 coats of this floor & garage paint will prime seal and protect.

The non slip aggregate reduces the risk of accidents. However, like any painted surface, it can still be slippery when wet.

How to mix Non Slip Deck Paint

Use a broomstick, mixer, or a slow-running drill or pallet knife to mix. For the best result, mix for 3-5 mins to ensure all the content is properly mixed together. This avoids colour and or drying problems.

As our coatings are heavily pigmented, separation can easily occur and you can have "colour float". For example, a green paint can look blue before mixing, which is why mixing your paint before use is essential.

 About This Item

  • NEW 3 IN 1 TECHNOLOGY - Primes Seals and Protects with just 2 coats. No Primer or sealer, Just 2 coats of this floor & garage paint will prime seal and protect.
  • NON SLIP DECKING PAINT: Polyurethane White Spirit based, High Quality & Durable Anti Slip finish floor paint
  • FAST DRYING TIMED: Touch Dry in 90 - 120 Minutes, Overcoat 12 - 24 hours
  • READY TO USE SIMPLE APPLICATION: Stir then use Non Slip Floor Paint directly from the tin no catalyst required
  • MULTI APPLICATION: Apply to Concrete Wood, Metal, Stone & Brick Floors by brush or roller
  • TOP TIP when applying 2 coats use our smooth floor paint first this makes the job more economical allong with being easier to apply the non slip on top of a smooth finish first coat
  • Proudly manufactured in England by B.C Paints Ltd. Please note images and product titles are for advertising purposes only, tins are supplied in bc paints cans or plain white for 0.5, 1 and 2.5, and occasionally 5 litre cans

Application Guide

Easy to apply by brush and roller.

Two coats of paint are recommended for the best longest lasting finish,

Remember good preparation of the floor is paramount to an excellent long lasting finish. Make sure Floor is clean from dust, dirt, moisture, oil etc before painting, never pre seal the floor prior to painting especially with latex or PVC sealers paint will not stick.

Painting your Floor Step By Step

  1. The floor area must be clean and free from dirt, dust, oil, grease and be dry & clear of any other contaminants. Good preparation is key to a good finish.
  2. Before you start, have your ppe ready as our paint is oil based so will not wash off easily with soap and water.
  3. Stir the paint & catalyst together well before use with a paddle on a slow running drill or substantial stick.
  4. Thin the first coat by 10 percent, to assist good priming and sealing of the floor, It's a good idea to use our smooth floor paint on your 1st coat as it's easier to overcoat and helps to keep the cost down.
  5. Before putting paint on the floor ensure you have good ventilation to allow solvent vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.
  6. Cut in around the edges first with a 2 to 3 inch brush, then work backwards towards your exit so as not to get boxed in.
  7. When painting large areas it's easier to pour the paint on the floor in stages, spread it out using a squeegee then back roll with a roller to release the air, to avoid having a bubbly finish as the air is trapped in the coating during the drying process.
  8. Apply a second coat 12-24 hours (overnight dry) after the first coat to build good colour and protection.

 



Always Stir Floor Paint Well Before Use Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix and mixing should take place for 3-5 mins to ensure all the content is properly mixed together to avoid colour and or drying problems.

As our coatings are heavily pigmented separation can easily occur and you can have colour float, for example a green paint can seem blue before mixing, this is one of the reasons mixing your paint before use is essential.


Make sure you use a broom stick, mixer on a slow running drill or pallet knife to mix. Mixing should take place for 3-5 mins.

 

mordant solution t wash

Universal PU Enamel Non Slip

Universal PU Enamel Non Slip is based on a white spirit polyurethane enamel resin making it very versatile in its application and covering a wide range of uses. Our product titles and images are for advertising purposes only, this product will arrive as Universal PU Enamel Non Slip, tins supplied will be similar to that shown above, manufactured and branded by our parent company B.C Paints Ltd, 1 & 2.5 litre cans are only ever supplied in plain white cans due to being a small family run company.


 


About Us

T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Our Parent Company B.C Paints Ltd produces in the same factory all the coatings T.A Paints has to offer, manufacturing only from the finest virgin raw materials, This is why all the labeling is from B.C Paints, but it's still us.

 

Our Ethos

Throughout the years our ethos has been the same, to offer a fair product for a fair cost, and never compromise quality for cost.


Paint Calculator

Calculate Your Solvent Paint

Solvent Paint Calculator in Metres





Total Sqm:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Solvent Paint Calculator in Feet





Total Sqf:

Quantity Needed:

Quantities are approximates per coat, we cannot allow for wastage and or any absorption that may occur with porous substrates.

Additional Information

Prime Colors

Black, BS 00 A 05 Goosewing Grey, BS 00 A 09 Mid Grey, BS 08 E 51 Yellow, BS 14 C 39 British Racing Green, BS 18 B 25 Grey, BS 18 E 53 Blue, BS 445 Tile Red, White

Size

5 litre, 2.5 litre, 1 litre